Extra Ornamental Wire Hardware:

Items in this section of the catalog are for COMPLETE FENCE ENCLOSURES ONLY.

If you are looking to purchase individual fence parts and accessories, please visit the Fence Part/Accessories section.

Standard Residential Wall Mount Casting

Wall mount castings can be used to attach the fence to a wall or column without the use of a post. They can also be used on end posts to step the fence sections rather than racking them or on pre-existing square posts. These will fit 1" x 1" rails.

Perrault Hose Holder

The elegant scrollwork of this hose holder will help to hide any unsightly hose. All people will notice is your home's stylish personality.

Rail Ends

These internal castings attach the sections to the posts and are included in the cost of the posts. They can also be bent to make various angles by using a little force. You only need to choose this option when ordering extra rail ends.

4 Gauge Patriot Ornamental Wire Fencing

Jerith's welded ornamental wire fence uses much heavier gauges than chain link fences, giving it added strength and security without costing much more. A single section of Patriot Fence can withstand 500 pounds!

Azalea Arbor

Jerith's beautiful arched arbor is highlighted by a keystone at the center of the arch and comes in either a 4' or 5' width. The arbor will match your fence perfectly when you order an extra section that can be cut down into two sections. You can also add a standard or Accent gate. (Please let us know if you'd like a 4' or 5' opening for your arbor.)

Picket Spring Clips
No Photo Available

These stainless steel spring clips give Jerith fences their "screwless" appearance. Instead of screws, these clips are used to attach fence pickets to the horizontal rails. They are included in your fence order, or they may be ordered separately for replacements.

Adjustable Residential Wall Mount Casting

Adjustable wall mount castings are used wherever a fence must attach to a post or a wall at an angle greater than or less than 90 degrees. Standard posts may also be used with slight angles. These will fit 1" x 1" rails. If you're not certain about your needs, please review our FAQ page or contact a customer service representative for help.

Filigree Hose Holder

Cast aluminum hose holder stores your hose easily and beautifully. Mounts easily on any wall.

Cable Ties

These ties are used when installing Patriot Ornamental Wire. They hold the end vertical wire of the section so it does not pull away from the post. One tie is needed for 48" and 60" high sections, and two are required for a 72" height. They are included in all full orders consisting of sections and posts.

#6 x 1/2" Stainless Steel Screws (Bag of 25)
No Photo Available

These stainless steel screws are used to attach the pickets to the rails in a section or gate for Residential style fences manufactured before 2010-11 and for American and Liberty Series fences. They are also used for accessories, such as finials and ball caps.

6 Gauge Patriot Ornamental Wire Fencing

This welded steel mesh fencing has only 1-3/4" spacing between vertical wires, making it virtually impossible to climb and able to meet most pool codes. Like all Patriot Fence, it is galvanized and powder-coated for outstanding outdoor durability.

Standard Ovation/Regency Wall Mount Casting

This wall mount casting is used for Ovation and Regency fence styles. It will fit 1" x 1-1/2" rails.

2" Post Caps

These 2" steel post caps are included with each Patriot post or can be purchased separately.

Foliate Hose Holder

A hose holder decorated with leaves is a unique way to hang your garden hose.

#6 x 3/4" Stainless Steel Screws (Bag of 25)
No Photo Available

These stainless steel screws are used for the assembly of Aero and Industrial fencing in order to attach the pickets to the rails.

Adjustable Ovation/Regency Wall Mount Casting

An adjustable wall mount casting allows you to create various angles with Ovation and Regency fence sections. This one will fit 1" x 1-1/2" rails.

Butterfly Hose Holder

If you enjoy nature, then you'll love this hose holder embellished with flowers and butterfly.

#10 x 1" Stainless Steel Screws (Bag of 25)
No Photo Available

These stainless steel screws are used to attach the horizontal rails of each section to the fence posts for Industrial fencing. They are also used for wall mount castings.

2-1/2" Post Cap
No Photo Available

These steel post caps will fit on top of the 2-1/2" square posts for Patriot Ornamental Wire fencing.

Tendril Hose Holder

A simple statement of elegance for your yard.

Aero Standard Wall Mount Casting

Wall mount castings can be used to attach the fence to a wall or column without the use of a post. They can also be used on end posts to step the fence sections rather than racking them or on pre-existing posts. These castings are specifically used for Aero's 1-1/8" x 1-1/2" rounded rails.

2" Welded Plates for Steel Posts
No Photo Available

These welded plates can be used when setting the fence on concrete, although core-drilling is always the best option.

#10 x 1.5" Stainless Steel Screws (Bag of 25)
No Photo Available

These screws are used to attach Aero fence sections to the 2-1/2" rounded posts.

Frog Hose Holder

Two frogs hop from one lily pad to the next on this whimsical hose holder.

Touch-up Paint - Brush-on (Black or Bronze)

A  bottle of touch-up paint to cover small scratches.

Aero Adjustable Wall Mount Castings

An adjustable wall mount casting allows you to create various angles for Aero fence sections when used with end posts. Fits 1-1/8" x 1-1/2" rails.

Vine & Trellis Hose Holder

A creeping vine on a trellis makes a beautiful place to hang your garden hose.

Industrial Wall Mount Casting

This wall mount is used for Industrial fence styles and allows you to attach the section to a wall or column. It will fit 1-5/8" rails.

Touch-up Paint - Brush-on (White)

Touch up paint is NOT guaranteed and will not weather like the FencCoat finish. Use sparingly.

Victorian Hose Holder

Bring a touch of Victorian charm to your home with this cast aluminum hose holder.

Adjustable Industrial Wall Mount Casting

Angles that are not close to 90 degrees on an Industrial style fence, require this wall mount casting. It will fit 1-5/8" rails.

Jerith Touch-up Paint - Spray Can

For larger touch-ups, use a spray can of paint that will match your fence parts.

2" Deck Mount Casting

Deck mount castings are a strong, attractive way to mount posts on top of a deck or wall. The post fits between the internal brackets and the base plate and is set into place with screws. NEVER use deck mount castings with gate posts or fences over 48" tall, as they will become unstable after prolonged use, and try to use them on only 5 consecutive posts or less if possible. Sturdier welded plates are also available.

Lag bolts are not included.

Fleur-de-lis Hose Holder

A small and simple hose holder with a Fleur-de-lis design similar to our Majestic Finials on our Jerith Fence.

Chickadee Hose Holder

Two adult Chickadees and their three little baby birds adorn this well-crafted hose holder.

2-1/2" Deck Mount Casting

These aluminum castings are made for 2-1/2" square posts that are used for commercial purposes.

Core-drilling is always preferable to deck mounts, and sections will be more secure in concrete. NEVER use deck mount castings with gate posts or fences taller than 48" high, as they will become unstable with prolonged use. It's recommended to use deck mounts on no more than 5 consecutive posts. Sturdier welded plates are also available.

Aero Deck Mount Casting

These mounts are used to attach Aero 2-1/2" rounded posts to a concrete slab.

 

Core-drilling is always preferable to deck mounts, and sections will be more secure in concrete. NEVER use deck mount castings with gate posts or fences taller than 48" high, as they will become unstable with prolonged use. It's recommended to use deck mounts on no more than 5 consecutive posts. Sturdier welded plates are also available.

 

Lag bolts are not included.

2" Welded Post Plates

This a perfect choice when core-drilling a 2" post is not an option, or you need to order deck mounts but are unable to use them due to the castings' height and strength limitations. These plates are welded to the fence/gate posts (sold separately), making them stronger and safer for gate posts and fences higher than 48". The best option, however, will ALWAYS be core-drilling.

2-1/2" Welded Post Plates

This a perfect choice when core-drilling 2-1/2" posts is not an option, or you need to order deck mounts but are unable to use them due to the castings' height and strength limitations. These plates are welded to the fence/gate posts (sold separately), making them stronger and safer for gate posts and fences higher than 48". The best option, however, will ALWAYS be core-drilling.

BBB Online Reliability Program Easy Fence Installation Fence Layout Guide Shop for home and garden accessories