Aluminum Castings
Items in this section of the catalog are for individual purchase. If you are looking to erect an entire fence enclosure, please visit the Jerith Fence section.
- Adjustable Residential Wall Mount Casting

Adjustable wall mount castings are used wherever a fence must attach to a post or a wall at an angle greater than or less than 90 degrees. Standard posts may also be used with slight angles. If you're not certain about your needs, please review our FAQ page or contact a customer service representative for help.
$3.95
-
- Aero Standard Wall Mount Casting

Wall mount castings can be used to attach the fence to a wall or column without the use of a post. They can also be used on end posts to step the fence sections rather than racking them or on pre-existing posts. These castings are specifically used for Aero's rounded posts.
$4.89
-
- 2" Deck Mount Casting

Deck mount castings are a strong, attractive way to mount posts on top of a deck or wall. The post fits between the internal brackets and the base plate and is set into place with screws. NEVER use deck mount castings with gate posts or fences over 48" tall, as they will become unstable after prolonged use, and try to use them on only 5 consecutive posts or less if possible. Sturdier welded plates are also available.
Lag bolts are not included.
$14.30
-
- 2-1/2" Deck Mount Casting

These aluminum castings are made for 2-1/2" posts that are used for commercial purposes.
Core-drilling is always preferable to deck mounts, and sections will be more secure in concrete. NEVER use deck mount castings with gate posts or fences taller than 48" high, as they will become unstable with prolonged use. It's recommended to use deck mounts on no more than 5 consecutive posts. Sturdier welded plates are also available.
Lag bolts are not included.
$19.80
-
- Aero Deck Mount Casting

These mounts are used to attach Aero 2-1/2" rounded posts to a concrete slab.
Core-drilling is always preferable to deck mounts, and sections will be more secure in concrete. NEVER use deck mount castings with gate posts or fences taller than 48" high, as they will become unstable with prolonged use. It's recommended to use deck mounts on no more than 5 consecutive posts. Sturdier welded plates are also available. Lag bolts are not included.$16.32
-


