Order Online or Call Toll-Free
 (888)433-1414
  FenceDirect.com Logo
Home  │ Fences in a Hurry!    It's Easy    Customer Service 

Home

Welcome

Who is FenceDirect?

Why Jerith Fences?

Aluminum Fences

Photo Gallery

Fences in a Hurry!

Additional Styles

Residential Fence

Series 100 Styles

Series 200 Styles

Series 400 Styles

Lexington & Concord

Ovation

Regency Fence

Buckingham

Windsor

Kensington

Encore Fence & Railing

Unique Design

Industrial Fence

Maximum Security

Gates

Standard Gates

Accent Gates

Estate Gates

Primrose Arbors

Scrolls & Finials

Castings

Specifications

Prices

Patriot Ornamental Wire Fence

Welded Steel Wire
Very Affordable

It's Easy

Easy to Install

Easy to Order

Lay Out the Job

Fence FAQ's

Customer Service

Contact Us
Privacy
Shipping & Returns
Site Map
 

No fence is easier to install!

Because the sections of Jerith's Residential, Regency and Industrial Aluminum Fences are pre-assembled, installation is quick and simple. The horizontal rails of the fence sections fit into factory-punched holes in the posts. Just slide a Style #101 Blacksection into the posts and set in concrete. That's all there is to it! All sections are 6-feet long,  and less than full sections are installed at a terminal post at the end of a line of fence. If you need less than a full panel of fence, use a hacksaw to cut it to size - no special tools are required.

Notice how the fence can follow the slope of a yard without any modification because it is screwed together, not welded. The only exceptions are the Buckingham Plus and the Windsor Plus styles of Regency Fence, and the Patriot Ornamental Wire Fence. These styles can not rake due to the installation of the rings.

Gates (except Patriot) are constructed with welded joints and require no assembly, except to install the hardware. They can swing in or out - left or right. You can decide at the time of installation.

Gates for the Patriot Ornamental Wire Fence require assembly using a standard section and a gate kit.


Encore Aluminum Fence sections require assembly before installation.

EASY INSTALLATION INSTRUCTIONS

  1. Establish your fence line.

  2. Start with gate posts, end posts or corner posts. Dig holes along a line of fence. 

  3. Place a post in the first hole. Take a section of fence and slide the horizontal rails into the the post.

  4. Place another post into the next hole and slide it onto the other end of the section.

  5. Continue installing sections and posts until you have finished with your holes.

  6. Pour concrete into the holes and align the posts. Make sure that the posts are plumb.

  7. Attach the sections to the posts, driving the self-drilling screws through the pre-punched holes in the post.

  8. Install the gates following the detailed instructions that are included with the gate.

  9. Fill in the top of the post holes with dirt and grass. This will make the fence look like it has been there for years.

  10. Your installation is now complete. Enjoy your fence!

Jerith Installation Instructions

If you wish, you can download a detailed set of installation instructions as published by Jerith.  You will receive a copy with your order, but if you wish to see it now, click on the picture of the instructions you wish to see.  You will need Adobe Reader to view, save or print the instructions.
 


Instructions for Ornamental Aluminum Fence

 

Instructions for Jerith Ever-latch© Magnetic Latch


Instructions for Encore Aluminum Fence

 


Instructions for Patriot Ornamental Wire Fence

 


Get Adobe Reader Adobe Reader is available free of charge for Windows and  Macintosh.

 

Home Page  |  Fences in a Hurry!   |  It's Easy  |  Customer Service


© 1999 - 2006 FenceDirect.com, L.L.C.  All Rights Reserved
Pricing, specifications, and availability are subject to change.